Marble Sealing Restoration Tips

Marble surfaces are some of the most beautiful to look at in your home. Whether they're used on your kitchen countertop or floors, the result is always impressive and can last for many years. However, marble has one drawback -- it has to be sealed to protect it from damage. Even something as simple as the acids in some foods can slowly damage a marble surface. Marble also absorbs moisture easily and, therefore, stains easily.

Proper sealing of marble is important if you want it to serve you for many years to come.

Use an Acid-Resistant Impregnating Sealer

Marble sealers are of different types ranging from topical sealers to impregnating sealers. Topical sealers wear out quickly and change the look of the material. Impregnating sealers penetrate deeper into the material and last much longer.

Since acid from foods such as lemons is a big issue, ensure the sealer you choose is acid-resistant. You should also avoid any sealers with acidic ingredients.

Clean the Countertop First

If you apply the sealer to a dirty countertop, you'll be sealing in the dirt and stains which will do more harm than good. Before you apply the sealer, clean the surface well using a soft cloth, warm water, and mild soap. Avoid any cleaners that are harsh or contain acidic ingredients. Ensure the surface is dry before proceeding with the work.

Read the Instructions On the Sealer Container

There are many different types of sealers. Manufacturers may have specific directions on how their products should be applied. They may also provide directions on exactly how much of the product should be used depending on the type of stone being sealed.

Test the Sealer First

If you've never used a particular sealer before, you should test it first on a small part of the countertop before you proceed to use it on the whole area. This gives you an opportunity to ensure that it will have a positive effect.

Give the Sealer Time to Soak In

Always wait for around five minutes before you wipe off the excess sealer. This gives the sealer enough time to soak into the marble. When cleaning off the excess sealer, use a clean microfiber cloth.

Always Apply Multiple Coats

It's always a good idea to apply more than one coat when it comes to marble sealing. This ensures that every part of the countertop is covered. It's recommended to wait at least 15 minutes after the application of the first coat before applying the second coat.

For more information, you can speak with companies like Pacific Retail Construction.